Hot water heaters are one of a house’s toughest working home appliances. Day or evening, it’s producing perfectly heated water at any time when you would like it. So when it all of a sudden is no longer working effectively, most of us tend to panic.

The good news is a non-functioning water heater does not always imply a pricey repair. Prior to making an emergency call to Haynes Plumbing, we recommend checking the issue yourself first.

Potomac Water Heater Repair Troubleshooting

Pilot Light CheckPotomac Water Heater Repair

For gas water heaters first get rid of the small panel which is situated at the bottom of the appliance and examine to notice if the pilot light is illuminated.
See if may relight in case it is not lit. If it remains lit, one should be able to listen that the water heater ought to start operating appropriately once again. The pilot light could need cleaned or the thermocouple may require to be replaced in cases where the pilot light will definitely not remain ignited.

Thermocouple Replacement

The term thermocouple may well sound like a very specialized title, but it’s an element on ones water heater that can easily be replaced. Haynes Plumbing would highly recommend having us execute the replacement but the measures right here are for educational purposes.

Consult the owner’s guide. It must have suggestions for ways to eliminate and replace the thermocouple.
Shut off the gas before taking out anything at all from the water heater.
Following the directions in your user’s handbook, remove the thermocouple by detaching it from both sides of the pilot light. The brand new thermocouple on the water heater must be cut to the right length.
The gas can then be turned back on and examine for leakages, then the pilot light can be lighted once more.

Press the Water Heater Reset Button

For property owners with an electric water heater, look for the place of the reset button and push it until a click is heard.
If a click is definitely not observed, or it falls short to restart the water heater, reset the breaker.
If a breaker reset does not suffice, the thermostat may well need replaced.

Thermostat Replacement

Both the power to the water heater and the power switch on the breaker will need to be turned off. Basic safety with electricity ought to be observed!
Use the owner’s manual to locate the thermostat wires, then detach them.
After removing the thermostat we will test to see its condition. If it is damaged, we will have to replace it.

Heating Element Replacement

With the power still off, the access panel on the water heater can be opened up.
The terminal screws may be loosened and the wires can be pulled away from the heating element.
We’d after that check each individual component of the element to see if they are faulty, and replace them as needed.

These water heater troubleshooting methods help get ones heater up and running once again. Haynes Plumbing is always here to help, therefore don’t be reluctant to call us today for any Water Heater Repair Potomac help.